ETFE is thin wall material with excellent mechanical properties and chemical and fluid resistance, ETFE operates between -65ºC and +150ºC. Habia manufacture ETFE wires to meet: NF C 93-524 and VG 95218-020A as well as a range of internal standards for 250V, 600V and 1000V.
FEP offers similar properties to ETFE, FEP offers an extended temperature range up to +200ºC. Habia manufacture FEP wires to meet: NEMA HP-4 as well as our own internal specifications. Voltages range from 160V up to 1000V as standard.
Habiaflame2 is designed for the most extreme environments, Habia's RV and RVH range of cables is designed to meet the IEC 60331-31 specification where the cable must continue to operate in emergency conditions such as fire, heavy impact trauma and immersion in water for a minimum of 120 minutes.
HFI 120 is perhaps Habia's best, all-purpose insulating material, HFI 120 offers a thin wall product with a wide temperature range of -40ºC to +120ºC and a voltage rating of 600V as standard. It is made to our internal specification.
HFI 140 is a thin, dual-wall insulation, HFI 140 offers excellent mechanical and chemical resistance properties as well as a high level of radiation resistance. The product has a temperature range of -50ºC to +120ºC, a voltage rating of 600V as standard and is fully approved to the UK Defence Standard: 61-12 Part 18 Issue 5 as well as being approved for use in London Underground Section 12 applications.
HFI 150 is designed as a flame retardant, Low Smoke Zero Halogen (LSZH) with an excellent temperature range and radiation resistance, HFI 150 offers a flame retardant, low smoke zero halogen product with a temperature range of -50ºC to +135ºC and a voltage rating of 600V.
HFI 260 is a low smoke zero halogen material with properties close to those of a fluoropolymer, HFI 260 has a temperature range of -60ºC to +190ºC, a voltage rating of 600V as standard and an exceptional radiation tolerance of >10 E7 Gy.
Kapton a tape-wrapped product offering exceptionally small dimensions, Kapton wires have a wide temperature range of -65ºC to +200ºC and are rated to 250V, 600V and 1000V as standard.
LSI 155 is available in both single and dual-wall, irradiated constructions, LSI 155 offers superior mechanical and chemical performance with a temperature range of -65ºC to +150ºC and a voltage rating of 600V. LSI 155 is fully approved to the UK Defence Standard: 61-12 Part 33/001.
PFA is a thin wall material with excellent mechanical properties and chemical and fluid resistance, PFA has an extended operating temperature range -65ºC and +260ºC. Habia manufacture PFA wires to our own internal specification in 250V, 600V and 1000V standards.
PTFE offers an excellent temperature range of -65ºC to +260ºC. Its excellent soldering resistance, mechanical properties, chemical resistance and electrical characteristics make it an ideal product in an extremely wide range of applications. Habia manufacture PTFE wires to meet: NEMA HP-3, NF C 93 -523, NF C 93-524, NF C 93-525 and NF C 93-526 as well as BS 3G 210 Types A, B and C and our own internal standards. Standard voltages range from 160V for ultra thin wires to 1000V.
TPS 125 XL is a thick-wall, irradiated insulation developed to meet the German VG 95218-025G specification, TPS 125 XL offers a range of larger sized cores with a temperature range of -50ºC to +125ºC (+150ºC for short term use), and a standard voltage rating of 600V.